Forskning ved Københavns Universitet - Københavns Universitet

Forside

A H2S microsensor for profiling biofilms and sediments: Application in an acidic lake sediment

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningfagfællebedømt

We developed a microsensor for the amperometric detection of dissolved hydrogen sulfide, H2S, in sediments and biofilms. The microsensor exhibits a fast (t90 <0.2 to 0.5 s) and linear response to H2S over a concentration range of 1 to >1000 μmol H2S l-1, and has a low stirring dependency of the microsensor signal (<1 to 2%). We used the new microsensor to obtain the first microprofiles of H2S in an acidic lake sediment with a several cm thick flocculant surface layer. Despite the low pH of 4.6, a relative low SO4 2- level in the lake water, and a broad O2 respiration zone of ca 6 mm, we were able to measure H2S depth profiles in the sediment at a good resolution, that allowed for calculation of specific sulfate reduction and H2S oxidation activities. Such calculations showed highest sulfate reduction activity in the anoxic sediment down to ca 20 mm depth. A comparison of calculated areal rates of O2 consumption and sulfate reduction indicated that sulfate reduction accounted for up to 13% of total organic carbon mineralization in the acidic sediment. All produced H2S was reoxidizecl aerobically with O2 at the oxic-anoxic interface. In addition to its good performance in acidic environments, the new H2S microsensor has proven useful for sulfide measurements in neutral and moderate alkaline (pH < 9) biofilms and sediments, and thus is a true alternative to the traditionally used potentiometric Ag/Ag2S microelectrode for most applications in aquatic ecology and biogeochemistry.

OriginalsprogEngelsk
TidsskriftAquatic Microbial Ecology
Vol/bind15
Udgave nummer2
Sider (fra-til)201-209
Antal sider9
ISSN0948-3055
DOI
StatusUdgivet - 1 jan. 1998

ID: 201682829